NOTICE: The dimensions shown on the attached dwgs for ball are the finished (after final machining) dimensions; your rough machined forging must guarantee these final dimensions.
注:附件球体图纸上的尺寸为机加工后的最终尺寸,你们的粗加工锻件必须保证这些最终尺寸。
欢迎光临 中国燃烧器网【燃友会@Chinaburner.com】中国燃烧机行业技术交流平台 (https://www.chinaburner.com/) | Powered by Discuz! X3.4 |