中国燃烧器网【燃友会@Chinaburner.com】中国燃烧机行业技术交流平台

 找回密码
 立即注册

扫一扫,极速登录

QQ登录

只需一步,快速开始

手机号码,快捷登录

查看: 1039|回复: 0
打印 上一主题 下一主题

[其他相关] 角管锅炉漏水之后该怎么办(中英对照)

[复制链接]

查看他的品牌

他的51warm

累计签到:920 天
连续签到:467 天

6862

主题

7864

帖子

9169

积分

管理员

Rank: 10Rank: 10Rank: 10

积分
9169

社区明星社区居民忠实会员原创达人

QQ
跳转到指定楼层
楼主
发表于 2021-9-27 09:20:37 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
角管锅炉漏水之后该怎么办(中英对照)

  作为一款常用的工业设备,角管锅炉并非可以一直使用下去,它是有一定使用寿命的。不仅如此,角管锅炉在运作过程中还可能会发生故障,从而对其运行效果造成一定的影响。漏水就是角管锅炉使用期间常见的故障之一,看看维修人员是如何解决此类问题的?


  角管锅炉漏水之后该怎么办


  内壁是角管锅炉漏水的常见部位,这其中还分为锅筒漏水和水冷壁及下降管漏水,如果是前者漏眼比较小的话,可以进行钢号相同挖补,挖补后再进行探伤;而后前漏水就需要换管,面积较大的更换一根。

  相对来说,如果是角管锅炉锅筒内漏水的话,消耗的修补费用还是比较高的,但主要还是取决于漏点所在的位置以及漏点大小。若出现锅炉渗出红色锅水,这说明是水质出现问题,可能因为碱度低或者水中溶解氧过高而造成的金属腐蚀。碱度低可以向锅水中投加氢氧化钠或磷酸三钠,水中溶解氧过高要通过除氧器来解决。

  其次,角管锅炉的水处理系统也会漏水,需先检查一些是否是锅炉腐蚀造成的,是的话是先除水垢,修理好漏水部分,再对循环水进行处理,加入药剂,对锅炉等设备材质进行缓蚀,阻垢,保护。

  另外,角管锅炉烟道漏水也会引起不良后果,解决的方法是先检查是不是锅炉爆管或是管板裂纹所致,如果需要换管、挖补看烟道所用的材质,铝和不锈钢材料可以用铝丝或碳钢氩焊,铁材料可直接酸性焊条。

  除此之外,角管锅炉中还会漏水的就是它的阀门,这类问题比较好解决,只要加盘根或更换新的阀门就可以了。角管锅炉中所有的漏水问题解决之后,还要内进行测试,确保万无一失。

  As a commonly used industrial equipment, a corner tube boiler cannot always be used. It has a certain service life. Not only that, but corner tube boilers may also malfunction in the process of operation, which will have a certain impact on their operational effectiveness. Water leakage is one of the common faults during the use of angle boilers. See how maintenance personnel solve such problems.


  What to do after the corner boiler leaks


  The inner wall is a common part of the water leakage of the corner boiler, which is also divided into the water leakage of the boiler drum and the water pipe wall and down pipe, if the former is relatively small, it can be the same steel digging, digging and then testing; Leaks need to change the pipe, a larger area to replace one.

  Relatively speaking, if it is a leak in the corner boiler boiler drum, the cost of repairs is still relatively high, but mainly depends on the location of the leak and the size of the leak. If a boiler seeps out of red pot water, this indicates a problem with the quality of the water. Metal corrosion may be caused by low alkalinity or high dissolved oxygen in the water. The low alkalinity can add sodium hydroxide or trisodium phosphate to the pot water. Dissolved oxygen in the water is too high to be solved by the deaerator.

  Second, the angle of the tube boiler water treatment system will leak, you must first check whether some of the boiler corrosion caused by yes, then the first descaling, repair the leakage part, and then recycled water treatment, adding pharmaceuticals, the boiler and other equipment Material corrosion, scale, protection.


In addition, the corner pipe boiler flue leaking can also cause adverse consequences, the solution is to check whether the boiler squib or tube plate cracks caused by, if you need to change pipe, digging to see the flue used in the material, aluminum and stainless steel Can use aluminum or carbon steel argon welding, iron material can be directly acidic electrode.


In addition, the angle tube boiler will also leak its valve, this kind of problem is better solved, as long as the root or replace the new valve on it. After all the leaks in the angle tube boilers are resolved, they are tested internally to ensure that they are perfectly safe.


内容来源:闽泉锅炉
共同点燃
此贴被TA们浏览了1039次
燃烧器网小编

欢迎投稿联系,温暖您的温暖~
中国燃烧器网品牌中心


 

文章内容转载于网络(注明出处)
如有侵犯版权请告知,我们将及时删除! 
如果您有更多的行业资讯和企业新闻,
欢迎与燃烧器网编辑部取得联系:
燃烧器网编辑部:
联系电话:0510-6856 6535/6536/6539
直线电话:139-1248-0569(微信同号)
投稿邮箱:web@warmwell.com.cn


回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册  

本版积分规则

快速回复 返回顶部 返回列表