累计签到:4 天 连续签到:1 天
版主
- 积分
- 52
- 公司
- 保密
|
The ASCO Series P122AFL FlameLogic is a compact, microprocessor based, primary flame safeguard control system designed to provide the proper burner sequencing, ignition and flame monitoring for on-off, multistage, or modulating burners. This system can be used in commercial heating and process equipment firing oil and gas fuels.
规格
Supply Voltage 110 VAC (+20%, -15%) 50/60 Hz, single phase
230 VAC (+10%, -15%) 50/60 Hz, single phase
Power Consumption 7 VA
Temperature Rating Operating: -40 °C to +60 °C
Storage: -50 °C to +85 °C
Flame Amplifier Rating UV: Terminals 22 & 23, 300VDC/ 3mA
FR: Terminals 24 & Earth, 330VAC (max), 3uA min/10uA max flame current
Protection Category IP40 standard version
Control Dimensions With wiring base 105 L x 105 W x 127 H (mm)
Shipping Weight Approx. 1.13 kg
特点
- Non-volatile lockout capability
- Air-flow proving, gas valve proving
- A run/check feature allows the operator to stop the program sequence in different positions for system troubleshooting
- Modbus-RTU communication via RS485
- Two built-in amplifiers (Ultraviolet, Flame Rod)
- Smart LEDs provide on board diagnostic lockout information
- Extended temperature operation (-40 °C to 60 °C)
- High capacity relay contacts
|
|